EKERHJULSATS - 4,0" (101MM)

Specialpris 174 kr Ordinarie pris 249 kr
2 I Lager
Artikelnummer
DARE5598

Byggsatsen innehåller material för ett par hjul.
För att montera dessa hjul behöver man en speciell jigg som säljes separat.
-------------------------------------------------------------------------------
During the development of the Dare line of WW-I models, it became obvious that lightweight scale wheels were just not available. Hence, these spoked wheels were designed for us by Pat Tritle.
Finished weight for an average set of wheels should be .3 ounces (appox 10 grams) or less and have proven over time to hold up well under normal flying conditions. Dare Spoked Wheels are designed to support up to about an 18 ounce (500 gram) model.
Our spoked wheels were designed to be used for WW-I and vintage aircraft. The wheels are not difficult to build, although the first try can be somewhat challenging, so take your time to insure best results. The inner rings are of 1/8" lite ply (2 cores per wheel) and the outer rings (tires) are of 3/16" balsa (4 per kit).
You'll need to buy only one "Wheel Jig Kit" to build any number of the 2 1/4", 2 1/2" and 2 3/4" diameter wheels. The wheel kit and jig kit sets are all sold separately.

_
- 30%